ISO Marine Distillate Fuel Oil
Product specifications below:
Characteristic | Limit | Test Method | Specifications | ||
ISO | ASTM | ISO-F-DMAb | ISO-F-DMB | ||
Viscosity @40°C, mm2 /s | max
min |
3104 | D445 | 6.00
2.00 |
11.00 2.000 |
Density @15°C, kg/m3 | max | 12185 | D 4052 | 890.0 | 900.0 |
Gravity, °API, reference only | min | D 4052 | 27.5 | 25.7 | |
Cetane Index | min | 4264 | D 976 | 40 | 35 |
Sulfur, mass % | max | 8754 | D 4294 | 0.0015 c | 0.50c |
Flash Point, PMCC, °C | min | 2719 | D 93 | 60.0 | 60.0 |
Acid Number, mg KOH/g | max | D 664 | D 664 | 0.5 | 0.5 |
Hydrogen Sulfide, mg/kg | max | IP570 | D 7621 | 2.00 | 2.00 |
Total sediment, existent, mass % | max | 10307-1 | D 4870 | — | 0.10d |
Oxygen stability, g/m3 | max | 12205 | 25 | — e | |
Carbon residue, 10% vol., mass % | max | 0.30 | — | ||
Carbon residue, mass % | max | 10370 | D 4530 | — | 0.30 |
Pour Point, °C Winter/Summer | max | 3016 | D 5950 | -6/0 | 0/6f |
Appearance | — | D 4176 | Clear & bright | —d | |
Water, volume % | max | 3733 | D 4006 | — | 0.3d |
Ash, mass % | max | 6245 | D 482 | 0.010 | 0.010 |
Lubricity, μm wsd@ 60°C | max | 12156-1 | D 6079 | 520 | —-g |
Distillation, °C, 90% point | min | 3405 | D 86 | — | 371 |
- Products conform to ISO 8217:2010(E) listed grades.
- ISO-F-DMA is dyed red.
- More stringent than ISO 8217:2010(E)
- If the sample is clear and with no visible sediment or water, the total sediment existent and water tests shall not be required
- Appearance is not C & B therefore oxygen stability not determined.
- The higher Pour Point limit is effective April 16 – October 17 unless requested otherwise by the purchaser.
- Sulfur >0.050 mass%, therefore lubricity not determined.